Command Table - L

Summary view of commands and processes

Command and Processes Table - L

For more information on the terms 'Command', 'Process' and 'Macro Command', see Command Table Introduction.

These tables list all commands and processes available in all products. If your product has access to a command or process, the link on the left of the table takes you to a dedicated help file for more information. If no link appears, the function isn't available in your product.

Symbols used in this table:

A green tick indicates that the module is part of the core system licensing for the specified product - no additional module is required.

X A red cross indicates the module is not part of the listed system and any commands held within it cannot be run (a separate product will be required).

A blue diamond indicates the module is an optional extra for the specified system.

Commands - L

Command Name

Studio RM

Studio OP

Studio EM

Studio UG

Studio Survey

Studio NPVS

Studio Mapper

Description

More Help

legend-switch

If a model or drill hole file is open, the fill code assignment is displayed in a legend.

Command Help

link-3dsolid-align-switch

X

Toggle the automatic creation ‘virtual’ tag lines, which control how the strings are linked together when the link-multiple-strings command is used.

Command Help

link-3dsolid-collate-switch

X

Toggle on or off the grouping of string data according to the Collate by Distance setting (added in the Wireframe Linking Settings panel).

Command Help

link-3dsolid-interp-switch

X

Toggle On/Off the Uniform Interpolation option applied when using the 3D Solid wireframe linking method.

Command Help

link-3dsolid-method-switch

X

Wireframe Linking Settings includes an option to utilize a 3D Solid linking method. This command can be run to enable this option, as an alternative to using the Wireframe Settings dialog (see previous link).

Command Help

link-3dsolid-view-plane-switch

X

This command will toggle the sorting of strings to be linked to create the resulting wireframe volume.

Command Help

link-area-method-switch

X

Select minimum surface area as the string linking criteria.

Command Help

link-boundary

X

Creates a wireframe link between two perimeters (closed strings) honouring any boundary/bridge strings.

Command Help

link-boundary-to-line

X

Creates a wireframe link between a perimeter (closed strings) and a string, honouring any boundary/bridge strings on the perimeter.

Command Help

link-complete-drive

X

Create drive wireframe co-axially around drive control string.

Command Help

link-crossover-switch

X

Toggle crossover checking on or off for string linking.

Command Help

link-drive-ends

X

X

X

X

X

Create drive wireframe, with separately defined ends.

link-drive-in-segments

X

X

X

X

X

Link drives using rules based on simple geometric shapes.

link-multiple-strings

X

Create wireframe volumes by linking a sequence of perimeters (closed strings) in order.

Command Help

link-outline-pair

X

Create wireframe from a pair of drive roof and floor strings.

Command Help

link-outline-pair-attribute

X

Enables multiple strings with a common attribute to be linked together in a single action to create a wireframe.

Command Help

link-quad

X

Create a wireframe link using points on selected segments of two strings.

Command Help

link-radii-method-switch

X

Select equi-angular shape as the string linking criteria.

Command Help

link-sel-strings-plane-attrib

X

Links selected strings to form a solid wireframe, after specifying the attribute which is used to group the selected strings.

Command Help

link-selected-outlines

X

Create a wireframe from a drive outline string and supplied height.

Command Help

link-selected-string-el-switch

X

Toggles the ability to end link selected strings.

Command Help

link-selected-strings-attrib

X

Links selected strings to form a solid wireframe, after sorting on a selected numeric attribute which determines the linking order. A number of strings (defined interactively through a dialog) will be grouped together.

Command Help

link-selected-strings-plane

X

Links selected strings to form a solid wireframe, after sorting by plane which determines the linking order.

Command Help

link-selected-strings-point

X

Links strings to form a solid wireframe.

Command Help

link-shape-method-switch

X

Select proportional length as the string linking criteria.

Command Help

link-single-outline

X

X

X

X

X

Create wireframe from a drive outline string and supplied height.

link-strings

X

Creates a wireframe link between two perimeters (closed strings) or two strings.

Command Help

link-to-line

X

Creates a wireframe link between a perimeter (closed string) and a string.

Command Help

linking-method-switch

Toggle between optimal and sub-optimal (fast) linking methods.

Command Help

lock-bhole-plane-switch

X

X

X

X

X

X

When moving blast holes, this command controls whether they are maintained on the original plane.

lock-view

Lock the view direction so it is perpendicular to the active section plane.

Command Help

 

Processes - L

Process Name

Studio RM

Studio OP

Studio EM

Studio UG

Studio Survey

Studio NPVS

Studio Mapper

Description

More Help

LAYOUT

X

X

X

X

X

Select a blast from the input file to work on in blast design; this defines both the Bench and Blast numbers which will remain in force until a new blast is chosen.

LINK

Links a Datamine binary file outside the project folder to a file inside the project folder.

Process Help

LIST

Displays any database file in a standard format.

Process Help

LISTC

Displays any *.dm file with only alphanumeric fields.

Process Help

LISTDR

Creates a list of all Datamine files within the project folder.

Process Help

LOADCF

Convert a macro file (*.mac) into a standard menu file (*.men) for faster execution.

Process Help

LOCDBOFF

Force macro commands to only use the local project folder.

Process Help

LOCDBON

Force macro commands to look for files that have been added to the project that may be outside the project folder.

Process Help

LUNICOND

X

X

X

X

X

X

Estimates the localized block grades by using the grade-tonnage curves given by the Uniform Conditioning process and by utilising a ranking of the SMU grades obtained by Ordinary Kriging.

 

For Macro commands, see here.